House Plan Design Services:
-
Custom House Plans and Construction Drawings
-
Affordable Ready-To-Purchase House Plans
-
Remodel Design and Construction Drawings
-
Color Renderings, Floor Plans and Elevations for Marketing and Presentations
-
Free Quotes
CONTACT US TO DISCUSS YOUR PROJECT
***Note: Photos and videos on our webiste may reflect changes made to original house plan design***
What’s Included:
Important: Structural design and drawings are site specific due to the variations in natural conditions from site to site, local code requirements and local building standards. We recommend you use a local engineer licensed in the area you are building to provide the structural drawings to accompany our drawings. Framing plans are not included. Structural drawings provided by your engineer will specify foundation, beams, posts, columns, headers as well as tie downs, anchors, connectors and all other structural items. Plumbing locations are shown to locate plumbing through the slab.
When you work with South Florida Design on a custom home or purchase our ready-to-purchase house plans, the following documents are typically included:
Elevations:
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*Material Labels
*Floor-To-Floor Heights
*Roof Slope Indicators
Floor Plans:
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*Door and Window Sizes
*Completely Dimensioned Floor Plan
*Room Labels and Interior Room Sizes
Electrical Layouts:
*Building Section Markers
*Electrical Outlets, Fixtures and Switching
Foundation or Slab Plan:
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*Floor and Deck Joist Sizes, Spacing and Direction
*Rough-in Plumbing Location
*Mechanical Equipment Locations
*Electrical Locations
Roof Design Plan:
Drawn to 1/8″ to 1/4″ = 1’0″ scale and includes:
*All Beam and Header Heights and Locations
*All Hips, Gables, Ridges and Valley
*Building Section Markers
Building Sections:
Drawn to 1/8″ to 1/4″ = 1’0″ scale and includes:
*Floor Joist Size and Spacing
*Floor-To-Floor Heights
*Non-Typical Plate Heights Indicated
Typical Wall Sections:
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*All Labels Indicating Wall Construction
*Foundation Wall Thickness and Reinforcing
*Insulation Type and Thickness
Miscellaneous Notes and Details:
*Miscellaneous General Notes
*Stairway Details (if applicable)
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*Material Labels
*Floor-To-Floor Heights
*Roof Slope Indicators
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*Door and Window Sizes
*Completely Dimensioned Floor Plan
*Room Labels and Interior Room Sizes
*Building Section Markers
*Electrical Outlets, Fixtures and Switching
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*Floor and Deck Joist Sizes, Spacing and Direction
*Rough-in Plumbing Location
*Mechanical Equipment Locations
*Electrical Locations
Drawn to 1/8″ to 1/4″ = 1’0″ scale and includes:
*All Beam and Header Heights and Locations
*All Hips, Gables, Ridges and Valley
*Building Section Markers
Drawn to 1/8″ to 1/4″ = 1’0″ scale and includes:
*Floor Joist Size and Spacing
*Floor-To-Floor Heights
*Non-Typical Plate Heights Indicated
Drawn at 1/8″ to 1/4″ = 1’0″ scale and includes:
*All Labels Indicating Wall Construction
*Foundation Wall Thickness and Reinforcing
*Insulation Type and Thickness
*Miscellaneous General Notes
*Stairway Details (if applicable)
View the Step-by-Step Process!